Home › Buyer guides › How to Choose Laser Power — 20W vs 30W vs 50W vs 100W

Buyer guide

How to Choose Laser Power — 20W vs 30W vs 50W vs 100W

More power is faster and deeper, but it costs more. Here is how to pick the power you actually need — 20W, 30W, 50W, 80W and 100W compared with real prices from the catalogue.

Power is measured in watts (W). On this site machines range from 3W (UV) to 1500W (welding). For marking, most buyers need 20W to 50W.

20W — the standard starting point

Most fiber machines here are 20W, from $1,257. That is enough for marking metal parts, jewellery, tools and electronic components at normal speed. If you are starting out, 20W is usually the right choice.

30W and 50W — faster, deeper

30W and 50W machines mark faster and deeper. The 20W / 30W / 50W handheld machine costs $1,550 / $2,260 / $2,686 depending on power. Choose more power if you mark many pieces a day, or need a deep mark on hard metal.

80W and 100W — large format and CO2 RF

80W and 100W machines are for large marking areas (600×600mm or 1100×1100mm) or for CO2 RF marking. The large-format fiber machine is $8,000 (50W) to $9,430 (100W); the 100 W CO2 RF machine is $12,830.

3W and 5W UV — a different scale

UV machines are only 3W or 5W, and that is normal — UV light does fine work with very little power. The UV pipeline machine is $6,257 (3W) or $7,857 (5W).

Rule of thumb

Buy the lowest power that does your job at the speed you need. Paying for power you never use does not make the mark better.

Machines mentioned in this guide

More buyer guides

Shop all 27 machines